The Spantex protective deck coating system
Step J Fill-Tex
Flexible putty like joint, crack and deck leveling filler derived from water based acrylic emulsion polymer.
Featuring good adhesion to wood, concrete, plywood and metal and Step 1 Prime-it and Step 2 ROLL-TEX. Low shrinkage, low VOC, environmentally friendly.
Designed to fill and level plywood joints, screw and knots holes in plywood as well as the transition between flashings and plywood. Used in conjunction with Polyester Seam Tape
Step 1 – Prime-It
Water based acrylic polymer emulsion primer. Used as Step 1 in the SPANTEX Deck Coating System.
Featuring excellent adhesion to wood, concrete, plywood, metals and SPANTEX Joint Filler. Fast dry, environmentally friendly VOC compliant with CCA and EPA.
Apply over all plywood, wood and metal flashings and drip edges to enhance greater adhesion to Step 2 SPANTEX ROLL-TEX. For optimal results apply Step 2 when PRIME-IT is dry but still tacky.
Step 2 – Roll-Tex
Description : A water based Neoprene (chloroprene) rubber liquid dispersion polymer mixed with consistent vulcanized rubber texturing chips. Dries to a uniform 30 mil textured rubber layer.
Features : Step 2 – Liquid deck coating that is trowel applied with SPANTEX ROLL-TEX Applicator leaving behind a consistent flexible, tear resistance base coat when dried. It has excellent adhesion properties to plywood, wood, metal flashing’s and drip caps when used in conjunction with Step 1 Prime-it. Low VOC, environmentally friendly.
Uses : Applied as the Texture Coat for the SPANTEX coating system over the Step 1 Prime-it.
Step 3 – Color Coat
An elastomeric tintable top coating derived from a water based acrylic emulsion polymer. Used as a COLOR COAT after Step 2 ROLL-TEX has been applied.
Designed to strengthen the top layer, prevent spalling, provide a stain resistant barrier, prevent premature aging, hard wearing, resist efflorescence, and is non-yellowing.
Used in conjunction with the Spantex system to waterproof decks, balconies, above ground walkways. Must be used over Step 2 – ROLL-TEX.